JVP 4x4 access floor fully steel encased chipboard panels
The JVP 4x4 C family panels are made with a chipboard core, bonded by means of water based glue onto steel galvanized trays and cap in hot dipped zinc galvanized steel sheets, curled together on top part of panel, forming a four time folded mechanically locked perimeter edge reinforcement. They are designed to enhance load bearing capacity preventing shock damage and de-lamination.
The bare steel surface of panels is suitable for loose-laid or bonded finishing of textile, wood, resilient and stone coverings.
This certificate covers the following products:
JVP 4x4 C3TTL
JVP 4x4 C4TTL
JVP 4x4 C5TTM
JVP 4x4 C4TTM
The pedestals located on the bottom of the panel are outside the scope of certification.